
Positive Input Ventilation in Somerset & Dorset
Positive input ventilation (PIV) can help reduce condensation and the moisture conditions that encourage mould growth in suitable homes. Condenex provides professional PIV installation across Somerset and Dorset, with advice on choosing the right ventilation approach for your property.
Based in Yeovil, we work with homeowners, landlords and managing agents. We install Nuaire Drimaster-Eco and Flatmaster systems, selecting the appropriate unit and installation position following an assessment.
If you are dealing with recurring condensation on windows or mould on walls and ceilings, our free condensation assessment helps establish the cause before we recommend work.
What is positive input ventilation?
Positive input ventilation is a form of whole-home ventilation that gently supplies filtered air into a property. This encourages air movement and helps dilute and displace stale, moisture-laden indoor air.
A loft-mounted system draws air from a suitably ventilated loft and introduces it through a ceiling diffuser. Other PIV systems are designed for properties without a loft. The right arrangement depends on the building and its ventilation needs.
You can read more about the technology in Nuaire’s guide to positive input ventilation.
Could PIV help with condensation and mould?
If condensation keeps returning, the answer may involve more than cleaning windows or repainting a wall. We investigate the moisture problem and consider whether PIV would be an appropriate part of the solution.
Tell us about any affected rooms, when the problem is most noticeable and what you have already tried. Useful details include:
- Repeated condensation on bedroom or living-room windows.
- Mould returning on walls, ceilings or window reveals after cleaning.
- Problems affecting several rooms rather than one isolated area.
- Existing extractor fans, heating arrangements and previous ventilation work.
Our recommendations may include PIV, targeted ventilation improvements or other work identified during the assessment. Where surfaces need treatment, we can also advise on professional mould clean down.
Choosing a Nuaire PIV system for your property
Drimaster-Eco for homes with a suitable loft
The Nuaire Drimaster-Eco range is designed for homes with loft space. The unit supplies filtered air through a ceiling diffuser, with the model and airflow settings selected to suit the property.
The loft must be suitable before installation. We consider its condition and ventilation, access and the proposed diffuser position when planning the work.
Flatmaster for flats and homes without a loft
The Nuaire Flatmaster range is designed for properties without loft space, including suitable flats and apartments. Its installation needs an appropriate air intake and a suitable location within the property.
We assess the available options before recommending a system, taking account of access and any permissions needed for the proposed work.
What happens during PIV installation?
Our service starts with understanding the property and agreeing the recommended work. We explain the proposed system, its location and any additional work needed before installation begins.
- Assess the property: review the condensation symptoms, existing ventilation and suitability for PIV.
- Plan the installation: select the unit and agree the installation position, access and quotation.
- Install and connect: fit the system, with a qualified electrician inspecting and connecting it to a suitable electrical supply.
- Set up and explain: adjust the system for the property and explain its controls, operation and maintenance requirements.
A straightforward installation can often be completed within a day. We confirm the expected timescale after assessing access, electrical work and the installation requirements.
PIV as part of a wider condensation solution
Installing a PIV unit does not remove existing mould or repair a leaking pipe, roof defect or other source of water ingress. These problems need their own investigation and appropriate treatment.
Bathroom and kitchen extraction may still be needed to remove moisture where it is produced. Heating and cold surfaces also matter, so our assessment may identify a need for repairs or insulation improvements alongside ventilation.
For a broader explanation of the role of ventilation in the home, see the Energy Saving Trust’s ventilation guidance.
PIV running costs, controls and maintenance
Running costs depend on the selected unit, its settings, electricity prices and whether an integral heater is fitted and operating. We can explain these factors when discussing the recommended system.
Some Nuaire models include a heater to temper incoming air. This uses additional electricity and is not a replacement for your home’s heating system.
PIV systems require ongoing care. Follow the instructions for your specific model, including filter checks and replacement, and keep the unit and diffuser unobstructed. Maintenance intervals vary between models and filter types.
If condensation persists after installation, the system settings, filters and wider moisture conditions may need reviewing. Nuaire explains the importance of suitability checks and upkeep in its advice on PIV, condensation and mould.
PIV installation: frequently asked questions
Will positive input ventilation stop mould coming back?
PIV can help reduce the moisture conditions that encourage mould in a suitable property. Results depend on the cause of the problem, the installation and the wider condition of the home. Existing mould may need separate cleaning, and leaks or building defects must also be addressed.
Can you install a PIV unit in a flat?
Potentially. Systems such as the Nuaire Flatmaster are designed for homes without loft space. We need to assess the proposed location, air intake, access and any permissions before confirming suitability.
Do I still need bathroom and kitchen extractor fans?
PIV does not automatically replace extraction in moisture-producing rooms. We review the existing ventilation and advise whether bathroom or kitchen extraction needs improving alongside the proposed system.
How much does PIV installation cost?
The quotation depends on the unit, access, electrical requirements and any associated work. Arrange an assessment so we can recommend an appropriate system and provide a quotation for your property.
Do you install PIV across Somerset and Dorset?
Yes. Condenex is based in Yeovil and provides positive input ventilation installation across Somerset and Dorset. Contact us with your postcode to confirm coverage and discuss an appointment.
Book your free PIV suitability assessment
Find out whether positive input ventilation is right for your home. Our free condensation assessment includes a written report and recommendations based on the property’s needs. Installation and any other recommended work are quoted separately.
Book Your Free Survey, call 0800 074 0586 or email info@condenex.co.uk to discuss your property.
If DIY is not your thing or the issue is too serious to manage yourself then we can provide a multitude of services to meet your needs.
Check out our INFORMATION section for tips or advice or complete the survey request form, you don’t have to live with this problem, there are solutions!
This is the one stop solution to rid yourself of the scouge of condensation. Eradicate that mould, stop that musty smell and keep those windows dry.
Ordered 7pm delivered noon next day.